Cloupor M4 Kit

Cloupor M4 Kit

Additional Savings

Enjoy an additional 10% off. Use code pure10 at checkout.

(you must register first)

Customer service

+386 40 297-778

Views: 5745 Brand: Cloupor
Product Code: V 06
Availability: In Stock
49.90€ Ex Tax: 49.90€

Available Options


* Color:

Qty: Add to Cart

The Cloupor Cloutank M4 Dry Herb Vaprizer is the newest design for use with Dry herb. Made of medical grade steel and Pyrex Glass, the M4 has all the features of the Cloutank M3 but has been upgraded with a few fantastic improvements.

The Cloupor Cloutank M4 has a larger chamber than the Cloupor Cloutank M3, allowing you to put larger amounts of dry herbs and letting you vape for longer periods of time. Another improvement of the M4 is that not only does it have a double filter to get purer vapor, but it also has an airflow control system!

The new airflow control system is perfect for dry herbs as it allows some air into the mix by turning the airflow adjustment ring and letting some air into the mix, as opposed to the M3 which is sealed.

The Cloupor Cloutank M4 Dry Herb Vaporizer is the ultimate accessory for any e-cigarette user who wants to add dry herb capabilities.

Specifications:

Detachable burner: the chamber and the coil are detachable to avoid damage while cleaning.

Patent Design M4 Chamber: Allow users to 'remix' the dry herbal leaves inside the chamber without opening the chamber, allowing all the dry herbal leaving inside accesible.

Self-clean-the M4 chamber one push buttom allows the user to clean the chamber easily without any tool.

Airflow control system.

Dual filter system.

510 Connector

What's included?

Cloutank F1 Battery 1pc

Cloutank M4 tank 1pc

Dry Herb Coil Heads 2pcs

Cleaning Brush 1pc

Glass cover 1pc

USB Cable 1pc

Wall Charger 1pc

Gift Box 1pc

Small tool 1pc

User manual 1pc​

How do I use the Cloupor M4?

As with most pen vaporizers, the Cloupor M4 is super easy to use. Refer to the full instructions located on the ‘User Guide’ tab, but here is a quick rundown on using the Cloupor M4:

Charge the Cloupor M4 - This could take a 1-2 hours the first time, but subsequent charges should not take longer than 45-60 minutes.

Load the Cloupor M4 - The M4 has two different style atomizers, one for aromatic blends, one for concentrates. Be sure to use the proper atomizer. The concentrate atomizer is wrapped around a wick, the blend atomizer has no wick.

Loading the crucible is easily done by removing the draw stem/globe combo, and either using the included tool to apply your concentrates, or loading your blends by hand in the heating chamber. Do not load too much; more than a sessions worth is definitely too much. Ensure the concentrate the making contact with the atomizer before you replace the draw stem/globe. Make sure not to touch the coil with the tool to avoid potential damage.

Power up and draw - If the switch on the Cloupor M4 is locked, unlock by pressing the button five times. This enables the power switch and the Cloupor M4 is ready to use. Press the button begin drawing from the Cloupor M4 after 3 seconds. Draw until you have had your fill, or the ten-second shut off turns the atomizer off.

How long does it take for the Cloupor M4 to pre-heat?

3 Seconds.

How do I change the temperature?

There are no temperature settings on the Cloupor M4. It goes from room temperature to its peak temperature in just 3 seconds.

What determines vapor quality in the Cloupor M4?

First and foremost its vital that you use the cleanest and purest concentrates you can find. The Cloupor M4 was designed for use concentrates that melt cleanly and leave no particulate behind. When using concentrates, it’s recommended to open the air intake on the rotating ring below the tank.

When using aromatic blends, its vital that you use a blend that has been ground consistently. Also, when using aromatic blends, it’s recommended to open the air intake on the rotating ring below the tank.

Since the Cloupor M4 has only one temperature setting, its essentially foolproof. Press the button, and draw until you have your fill.

Is the Cloupor M4 compatible with liquids and concentrates?

Yes/No. It depends on the atomizer you are using, look closely at the included atomizers in the kit, and make sure that you are using the atomizer that is wrapped around a wick, as opposed to the atomizers that are not. The Cloupor M4 was designed solely for liquids and concentrates. It ships with a crucible/atomizer for solid concentrates, but other tanks are available.

Will the Cloupor M4 work on 240v power?

The charger is rated from 100v to 240v, but you might need an adapter for your outlet if outside North America. USB option is always available, negating the need for AC adapters, regardless of your location.

My vapors seem thin. What can I do to change that?

First and foremost its vital that you use the cleanest and purest liquids and concentrates you can find. The Cloupor M4 was designed for use with liquids and concentrates that melt cleanly and leave no particulate behind. Keep the air intake ring set to the open position with blends, and closed position with concentrates.

Since the Cloupor M4 has only one temperature setting, its essentially foolproof. Press the button, and draw until you have your fill or until the Cloupor M4 shuts off automatically.

What is the Cloupor M4 made from?

The atomizer coil is nickel/aluminum-alloy, the wick is fiberglass, the crucible that surrounds the coil is ceramic, the body is made of steel. The globe is made from glass.

What is the heating element made from?

Nichrome, a non-magnetic alloy of nickel, chromium, and often iron, usually used as a resistance wire in applications from atomizer coils to toasters and beyond.

Will Cloupor M4 over-heat?

Liquids and concentrates love high temperatures, so you should not have an overheating issue!

How full should the heating chamber be?

It’s best to not fill the heating chamber full. Just apply enough for one session at a time. The Cloupor M4 was not designed to hold more than that.

Is there an auto-shutoff on the Cloupor M4?

Yes, after ten seconds of use, the Cloupor M4 will power off.

There is also a safety on the power switch, clicking it five times turns off the power button, and repeating this turns the button back on. This is great if you have the Cloupor M4 in your purse, or pocket, as it prevents it from going off accidentally and wasting your battery or worse.

How do I replace the atomizer on the Cloupor M4?

You can replace them very easily by disconnecting them from the battery, unscrewing the atomizer from its mount and replace with a fresh atomizer.

What size Screens does the Cloupor M4 use?

The screen size is proprietary. The screen in the Cloupor M4 can be unscrewed from the bottom of the draw stem and cleaned with isopropyl alcohol; the kit also comes with an extra replacement screen.

What type battery does the Cloupor M4 use?

The battery is a 650mAh Li-Ion barrel battery. It has 510, and eGo threads.

What charging options do I have with the Cloupor M4?

The Cloupor M4 comes with an AC adapter/USB plug, rated from 100v to 220v. The USB plug can be used by itself in a powered USB port anywhere in the world, but if you are charging your Cloupor M4 outside of North America with the included AC adapter an outlet/plug adapter might be needed.

How do I know if my Cloupor M4 Battery needs to be charged??

When the Cloupor M4 Battery is in need of a charge, the power button will flash to indicate what level the battery is at:

RED: 0-2%

Yellow: 3-50%

Green: 50-100%

At this time, connect the Cloupor M4 Battery to the Cloupor M4 Wired USB Charger (at the base of the Cloupor M4 Battery). The Cloupor M4 Wired USB Charger can be connected to either the Wall Adapter or any compatible USB port. A red LED light will illuminate to indicate that a charge is being administered.

Once the red LED light turns green, the Cloupor M4 Battery has been fully charged.

How long does it take to recharge the battery?

According to Shenzen Cloupor Technology., allow 1-2 hours charging time for the first 3-4 cycles. Then, it should only take about one hour to charge, depending on your charging source. Using the AC USB adapter will charger your M4 faster than most USB ports.

How should I care for my Cloupor M4?

Any concentrate that may have collected on the body of your Cloupor M4 can be removed with a warm damp cloth.

If you need to remove essential oil from inside the crucible, it’s not advisable, but you can do so using your Cloupor M4 Tool. USE CAUTION and be extremely careful not to damage the atomizer coil.

Within the crucible of your Cloupor M4 tank, the coil works to clean itself by burning off any residue that comes in contact with it. We don’t recommend using any type of liquid cleaning agent in the Cloupor M4 tank, as doing so could cause it to malfunction.

The glass globe and draw stem can be soaked in isopropyl alcohol until the buildup dissolves. Do not clean the rubber or silicone o-rings with alcohol, as it could damage the rubber. Use warm soap and water to soak until clean. Agitate occasionally while soaking for stubborn buildup.

How often should I clean my Cloupor M4

Within the globe of your Cloupor M4 Tank, the coil works to clean itself by burning off any residue that comes in contact with it. We don’t recommend using any type of liquid cleaning agent in the Cloupor M4 coil, as doing so could cause it to malfunction. If you need to remove concentrate from the tank, you can do so using your Cloupor M4 Tool, but we suggest avoiding putting any metal near the atomizer.

The glass globe and draw stem, however, will take on a substantial amount of buildup. Monitor and clean as needed. Check your vape each time you use it.

Is it okay to use isopropyl alcohol on my Cloupor M4?

On certain parts alcohol is fine. The top cap will incur the most buildup, soaking it in alcohol or cleaning with alcohol soaked cotton swab are effective cleaning methods.

Cleaning the atomizer is not recommended, replace as needed.

Make sure you don’t expose the atomizer or battery to any liquids whatsoever. If you need to clean the outside of the Cloupor M4, use a warm damp cloth. If the Cloupor M4 gets wet in any way, allow to dry in the sun or a warm dry area until COMPLETELY DRY. Attempting to use the Cloupor M4 if wet will cause serious damage to the unit.

What parts of the Cloupor M4 will I need to clean the most?

The glass globe and draw stem will incur the most buildup, soaking them in alcohol or cleaning with alcohol soaked cotton swab are effective cleaning methods. Make sure you don’t expose the atomizer or battery to any liquids whatsoever.

What is replaceable on my Cloupor M4?

The atomizer should be replaced as needed on the Cloupor M4. When you notice a distinct change in aroma, it’s time to replace.

There are no reviews for this product.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: